Categorías

Descuento 41%

Micromotorreductor LP 6V 50:1 eje extendido

Precio de lista: MXN$320.00  
MXN$190.00
(IVA incluido) Usted ahorra: MXN$130.00 (41%)
2203
1 Artículos
+
Especificaciones con 6V
Voltaje 6 V
Corriente (sin torque) 40 mA
Corriente Maxima (con torque) 360 mA
Velocidad ( RPM) 250 RPM
Torque

0.5 Kg-cm

Características adicionales - relación 51.45:1

This gearmotor is a miniature (0.94" x 0.39" x 0.47"), low-current brushed DC motor with 51.45:1 metal gearbox, similar to Sanyo's popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft. This version also has a 4.5 x 1 mm extended motor shaft.

Key specs at 6 V: 250 RPM and 40 mA free-run, 7 oz-in (0.5 kg-cm) and 0.36 A stall.

Overview

These tiny brushed DC gearmotors are intended for use at 6 V, though in general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 – 9 V range (rotation can start at voltages as low as 0.5 V). Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor.

Gearmotor Dimensions

Micro metal gearmotor dimensions (units in mm).

The gearbox has a long (0.365" or 9.27 mm), 3 mm-diameter D-shaped metal output shaft, and the brass faceplate has two mounting holes threaded for M1.6 screws (1.6 mm diameter, 0.35 mm thread pitch). The gearmotor weighs approximately 0.35 oz (10 g). Versions with the extended motor shaft have a 1mm diameter round shaft that protrudes 4.5 mm from the rear of the motor, between the two motor terminals; this is not pictured in the above dimension diagram.